6 Equipment Every Construction Work Site Requires
It is no doubt that doing any construction work requires a lot of time and is not as easy as it sounds. From the base to the roof, every construction work requires complete precision, skills, and hard work. Building any structure is major work and needs all sorts of construction equipment or tools to get your work done and job easier than ever. So, while doing construction work on any site, you often require high-tech equipments, which are the much-needed ones without which it becomes difficult to keep your construction work in a continuous mode.
On the other hand, lack of equipment needed in construction work can halt the entire job and result in unnecessary delay and work stoppage. In this context, we list below six pieces of equipments that every construction site requires. Let us have a look:-
What are the essential construction equipment we see on each construction work site?
1. Hammer & nails
The first and foremost equipment that every construction site requires is a hammer and nails. It is no doubt a builder is, in fact, incomplete without his dependable hammer and a few nails in hand. So, whenever a builder is ready to construct any site, he will surely need this two must-required equipment.
On the other hand, you need not forget the different types of hammers that you may need while working on a construction site. So, always make yourself habitual of carrying these two equipments while being on a construction site and a builder of course.
2. Power drill
While working on a construction project, it is often seen that a builder needs a power drill to do the actual drilling. When you require equipment for a job that requires more than the nails, power drilling seems to be your best friend. Though, you need to understand that nails aren’t superior to materials like brick or sheet metal, so you may need to use your power drill at one point or the other.
Yet another piece of equipment that a builder always needs in his construction work at his site is a screwdriver. A builder uses a screwdriver for two reasons, the first one is for opening screws, and the other one is for fastening two objects altogether. Being a builder, you can also use screws to connect the two materials like boards. Also, several people also prefer screws to nails just because they are a bit stronger.
Apart from this, screws and screwdrivers also come in varied shapes and sizes, so it is always recommended to have a good assortment of almost all shapes and sizes handy to ensure smoothness at the construction site and work.
It doesn’t matter what project you are working on; you always need saws to cut wood and various other materials. Also, you will often find different types of saws at the construction site, such as power saws that pass through the materials speedily, table saws and jigsaws that come in handy, etc.
5. Tape measure and level
It is very common that while building, you often need to cut a piece of wood to easily fit a doorway, so the point is, how will you cut it? It’s simple as you need a level and tape measure to achieve the exact cut now and then. So, it would be best if you had a level to measure whether the surface is one level or plumb. However, you will always need a tape measure in your equipment box almost every time.
Apart from this, it would be best if you also focused on forklift hire while doing construction work at the site as it is not always possible to carry and transport those huge, expensive, and heavy machines.
6. Electrical Tester
Last but not least, having an electrical tester is also one of the essential tools that every builder must have at the construction site. It can help you know whether an electric circuit is working or flowing current or not. If there is an electric current inside, you will find the light will immediately glow.
How to stay safe on a construction work site?
Wear your personal protective equipment (PPE) at all times:
Before entering the site, double-check that you have all of the PPE you’ll need. Personal protective equipment (PPE) is critical since it is your final line of defense if you come into touch with a hazard on the job site. Using high-visibility clothing can assist ensure that you are spotted. Safety boots provide you with traction and protection for your feet. Hard helmets may be readily replaced, but your skull is not so simply replaced.
Wearing it will not protect you if you do not put on the protective gear. Wear your hard helmet, safety boots, and high-visibility vest as a bare minimum, as well as any other personal protective equipment (PPE) essential for the activity at hand.
Do not begin working without first receiving an induction on a construction work site:
Each jobsite has its own set of dangers and work processes. There are no two places that are exactly alike. Make certain that you are aware of what is taking place so that you can work securely. The completion of inductions is a legal necessity on any construction site where you work.
Keep the construction work site clean:
Construction work is a sloppy endeavor. Slips and trips may not appear to be a significant issue when compared to the other high-risk activity that is taking on on the site, but don’t be deceived. Remember to maintain your work area clean during your shift in order to limit the amount of slip and trip risks on the floor. Pay close attention to regions such as access and escape routes, among other things.
Don’t put yourself or others in danger for any construction work:
Actions speak louder than words in this situation. This is especially true on construction sites, where a single mistake might put you in serious danger. Set a good example, think about safety, and behave safely while on the job.
Victor Z Young is a Civil Engineer with 35 years of experience working alongside the executive team of various construction companies. Victor specializes in construction insurance, delay analysis, performance analysis and engineering. He holds a Doctor of Project Management from Northwestern University.